International Journal of Reliability, Risk and Safety: Theory and Application

International Journal of Reliability, Risk and Safety: Theory and Application

The Role of Artificial Intelligence in Implementing HSE Standards in the Petrochemical Industry

Document Type : Original Research Article

Authors
1 . Department of Strategic Management, Faculty of Management and Industrial Engineering, Malek Ashtar University of Technology, Tehran, Iran
2 Department of Aerospace Engineering, Faculty of Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
Abstract
Health, Safety, and Environmental (HSE) standards in the petrochemical industry hold special importance due to the high-risk and sensitive nature of the activities in this sector. With significant advancements in the field of Artificial Intelligence (AI), innovative tools and methods have been introduced to enhance the efficiency and effectiveness of HSE management systems. This article examines the crucial role of AI in the implementation and maintenance of HSE standards in the petrochemical industry. AI significantly contributes to reducing accidents and increasing safety by analyzing large and complex datasets, identifying risk patterns, and predicting potential incidents. Additionally, through the optimization of safety processes, monitoring compliance, and mitigating environmental risks, AI has positively impacted HSE management. The implementation of intelligent systems in this field not only helps maintain the health and safety of employees but also leads to greater sustainability and accountability within the petrochemical industry by reducing negative environmental impacts. This article delves into the various applications of AI in HSE management in the petrochemical industry, discussing the benefits and challenges associated with it. This study aims to provide a comprehensive and up-to-date perspective on the role of AI in enhancing HSE standards and improving safety and sustainability in the petrochemical industry.
Keywords
Subjects

  1. “Application of a fuzzy differential equation system to the oil and gas industry safety model,” International Journal of Information Technology, vol. 15, no. 3, pp. 1243–1253, 2023, https://doi.org/10.1007/s41870-023-01209-7.
  2.  Bensonch, C. D. Argyropoulos, C. Dimopoulos, C. V. Mikellidou, G. Boustras, “Analysis of safety climate factors and safety compliance relationships in the oil and gas industry,” Safety Science, vol. 151, p. 105744, 2022, https://doi.org/10.1016/j.ssci.2022.105744.
  3.  Zou et al., “Intelligent construction framework and methods for mountain oil and gas pipelines,” Natural Gas and Oil, vol. 38, no. 3, pp. 102–107, 2020, (in Chinese).
  4.  Chen, W. Feng, B. Yan, “Construction of integrity management system of oil and gas pipeline full life cycle,” Oil & Gas Storage and Transportation, vol. 39, no. 1, pp. 40–47, 2020, (in Chinese), https://doi.org/10.6047/j.issn.1000-8241.2020.01.006.
  5.  Yu et al., “Research on intelligence of oil pipeline based on data mining,” Natural Gas and Oil, vol. 38, no. 2, pp. 1–7, 2020, (in Chinese).
  6. S. El-Abbasy, A. Senouci, T. Zayed, F. Mirahadi, and L. Parvizsedghy, “Artificial neural network models for predicting condition of offshore oil and gas pipelines,” Automation in Construction, vol. 45, pp. 50–65, 2014, https://doi.org/10.1016/j.autcon.2014.05.003.
  7.  Liu, R. Luo, Z. Yang, L. Wang, and L. Wang, “Research and practice of risk early warning technology for lost circulation with drilling under the conditions of geological engineering information fusion: The example of the Yuanba Area,” Processes, vol. 10, no. 12, p. 2516, 2022, (in Chinese), https://doi.org/10.3390/pr10122516.
  8.  Zhou, “Artificial intelligence technology,” Times Finance, vol. 2017, no. 8, p. 295, 2017, (in Chinese).
  9.  Song et al., “Time‑series well performance prediction based on Long Short‑Term Memory (LSTM) neural network model,” Journal of Petroleum Science and Engineering, vol. 186, p. 106682, 2020, https://doi.org/10.1016/j.petrol. 2019.106682.
  10.  Song et al., “A method to predict reservoir parameters based on convolutional neural network-gated recurrent unit (CNN-GRU),” Petroleum Geology and Recovery Efficiency, vol. 26, no. 5, pp. 73–78, 2019, (in Chinese), http://dx.doi.org/10.13673/j.cnki.cn37-1359/te.2019 .05.009.
  11.  J. Nam and Y. S. Hwang, “Antibacterial and antioxidant effect of ethanol extracts of Terminalia chebula on Streptococcus mutans,” Clinical and Experimental Dental Research, vol. 7, p. 987, 2021, https://doi.org/10.1002/cre2.467.
  12.  A. Balhaddad, L. Mokeem, M. A. S. Melo, and R. L. Gregory, “Antibacterial activities of methanol and aqueous extracts of Salvadora persica against Streptococcus mutans biofilms: An in vitro study,” Dentistry Journal, vol. 9, no. 12, p. 143, 2021, https://doi.org/10.3390/dj9120143.
  13.  Hussain, et al., “Utilization of pumpkin, pumpkin powders, extracts, isolates, purified bioactives and pumpkin based functional food products: A key strategy to improve health in current post COVID 19 period: An updated review,” Applied Food Research, vol. 2, no. 2, p. 100241, 2022, https://doi.org/10.1016/j.afres.2022.100241.
  14.  Batool et al., “Nutritional value, phytochemical potential, and therapeutic benefits of pumpkin,” Plants, vol. 11, no. 11, p. 1394, 2022, https://doi.org/10.3390/plants11111394.
  15.  Liu et al., “Effects of a new fermented soya bean meal on growth performance, serum biochemistry profile, intestinal immune status and digestive enzyme activities in piglets,” Journal of Animal Physiology and Animal Nutrition, vol. 106, no. 5, p. 1046, 2022, https://doi.org/10.1111/jpn.13649.
  16.  Šamec et al., “The potential of pumpkin seed oil as a functional food—a comprehensive review of chemical composition, health benefits, and safety,” Comprehensive Reviews in Food Science and Food Safety, vol. 21, no. 5, pp. 4422–4446, 2022, https://doi.org/10.1111/1541-4337.13013.
  17. Wintersohle, I. Kracke, L. M. Ignatzy, L. Etzbach, and U. Schweiggert-Weisz, “Physicochemical and chemical properties of mung bean protein isolate affected by the isolation procedure,” Current Research in Food Science, vol. 7, p. 100582, 2023, https://doi.org/10.1016/j.crfs.2023.100582.
  18.  Guo et al., “Quality marker discovery and quality evaluation of Eucommia ulmoides pollen using UPLC-QTOF-MS combined with a DPPH-HPLC antioxidant activity screening method,” Molecules, vol. 28, no. 13, p. 5288, 2023, https://doi.org/10.3390/molecules28135288.
  19.  Azizi, S. Haghpanah-Kouchesfahani, S. Nawabi, N. Daneshvar, F. Shirini, and H. Tajik, “Benzimidazolium dihydrogen phosphate: A novel green catalyst for the preparation of pyrano[2,3-c]pyrimidines and pyrano[3,2-d]chromenes in aqueous media,” Chemical Methodologies, vol. 8, no. 9, pp. 626–644, 2024, https://doi.org/10.48309/chemm.2024.457715.1796.
  20.  Teneva and P. Denev, “Biologically active compounds from probiotic microorganisms and plant extracts used as biopreservatives,” Microorganisms, vol. 11, no. 8, p. 1896, 2023, https://doi.org/10.3390/microorganisms11081896.
  21. Raza, Q. Mahboob, A. A. Khan, T. A. Khan, and J. Hussain, "Computation of Importance Measures Using Bayesian Networks for the Reliability and Safety of Complex Systems," International Journal of Reliability, Risk and Safety: Theory and Application, vol. 3, no. 2, pp. 99-111, 2020, https://doi.org/10.30699/IJRRS.3.2.12.
  22. M. Esfandabadi, A. Esmaeili, and K. Karbasishargh, "Optimizing performance through retrofitting: strategies for effectiveness, defence, and resiliency to enhance safety and reliability," International Journal of Reliability, Risk and Safety: Theory and Application, vol. 7, no. 1, pp. 83-92, 2024, https://doi.org/10.22034/IJRRS.2024.7.1.10.
  23. MoghimiEsfandabadi, M. H. Djavareshkian, and S. Abedi, "Significance of aviation safety, its evaluation, and ways to strengthen security," International Journal of Reliability, Risk and Safety: Theory and Application, vol. 6, no. 2, pp. 37-45, 2023, doi: https://doi.org/10.22034/IJRRS.2023.6.2.5.
Volume 8, Issue 1
June 2025
Pages 30-46

  • Receive Date 18 January 2025
  • Revise Date 22 April 2025
  • Accept Date 23 April 2025