In this article, the reliability of the equipment related to the PC-7 aircrew is evaluated using the FMEA method. For this purpose, a complete review of the equipment and systems related to the PC-7 aircrew was done. Then, the potential failure modes were determined for each of the subsystems. In the following, the parameters of the RPN formula were determined by the questionnaire method and obtaining the opinions of technical experts and pilots of the PC-7 aircraft about the severity of the failure, the probability of their occurrence, and the difficulty of detecting them. Also, the risk diagram was drawn based on two main parameters, including the severity of the effect and the probability of failure. Finally, the highest RPN coefficient determined that the three electronic, engine, and airplane fuel systems have the highest RPN values and risk probability.
Lu-ning, “Reliability analysis of electric element in ground tester,” Aircraft Design, no. 2, pp. 50-53, 1998.
Marvin, and H. Arnljo, System Reliability Theory: Models, Statistical Methods, and Applications, 2nd edition, Wiley, p. 88, 2004, doi: https://doi.org/10.1002/9781119373940.fmatter
M. Tay, and C.P. Lim, “On the use of fuzzy inference techniques in assessment models: part II: industrial applications,” Fuzzy Optimization and Decision Making, vol. 7, no. 3, pp. 283–302, 2008, doi: https://doi.org/10.1007/s10700-008-9037-y
Lališ, S. Bolčeková, and O. Štumbauer, “Ontology-based reliability analysis of aircraft engine lubrication system,” Transportation Research Procedia, vol. 51, pp. 37-45, 2020, doi: https://doi.org/10.1016/j.trpro.2020.11.006
K. Song, G.C. Bai, X.Q. Li, and J. Wen, “A unified fatigue reliability-based design optimization framework for aircraft turbine disk,” International Journal of Fatigue, vol. 152, 2021, doi: https://doi.org/10.1016/j.ijfatigue.2021.106422
Mohamad Khanlo, and A.M. Mahmodi Kohan, “Failure mode and effects analysis on the hydraulic system of aircraft ilyushin-76,” International Journal of Reliability, Risk and Safety: Theory and Application, vol. 5, no. 1, pp. 49-58, 2022, doi: https://doi.org/10.30699/IJRRS.5.1.7
Alamri, and J. Mo, “Optimising system continuity in preventive maintenance schedules based on integrated failure mode and spare part inventory modelling,” International Journal of Reliability, Risk and Safety: Theory and Application, vol. 5, no. 2, pp. 19-31, 2022, doi: https://doi.org/10.30699/IJRRS.5.2.3
H. MoghimiEsfandabadi, M. Djavareshkian, and S. Abedi, “The significance of aviation safety, its evaluation, and ways to strengthen security,”International Journal of Reliability, Risk and Safety: Theory and Application, vol. 6, no. 2, pp. 37-45, 2023, doi: https://doi.org/10.22034/IJRRS.2023.6.2.5
Liu, Y. Zhao, and P. Liu, “An integrated FMEA framework considering expert reliability for classification and its application in aircraft power supply system,” Engineering Applications of Artificial Intelligence, vol. 123, Part B, p. 106319, 2023, doi: https://doi.org/10.1016/j.engappai.2023.106319
Jia-Qi, F. Yun-Wen, T. Da, C. Jun-Yu, and L. Cheng, “Operational reliability evaluation and analysis framework of civil aircraft complex system based on intelligent extremum machine learning model,” Reliability Engineering & System Safety, vol. 235, p. 109218, 2023, doi: https://doi.org/10.1016/j.ress.2023.109218
Zhou, M. Farsi, A. Harrison, A. Kumar Parlikad, and A. Brintrup, “Civil aircraft engine operation life resilient monitoring via usage trajectory mapping on the reliability contour,” Reliability Engineering & System Safety, vol. 230, 2023, doi: https://doi.org/10.1016/j.ress.2022.108878
Jiang, Y. Han, W. Cui, F. Wan, T. Yu, and B. Song, “An improved modified Weibull distribution applied to predict the reliability evolution of an aircraft lock mechanism,” Probabilistic Engineering Mechanics, vol. 72, 2023, doi: https://doi.org/10.1016/j.probengmech.2023.103449
Vališ, J. Hlinka, J. Koláček, P. Procházka, O. Pokora, R. Cipín, and R. Koštial, “Comprehensive study on reliability, deterioration, and aging of lithium-ion batteries in electric-powered aircraft assessed after a storage period using functional data analysis and non-parametric backup,” Engineering Failure Analysis, vol. 154, 2023, doi: https://doi.org/10.1016/j.engfailanal.2023.107661
Peng, Y. YIN, P. XIE, X. WEI, and H. NIE, “Reliability analysis of arresting hook engaging arresting cable for carrier-based aircraft influenced by multifactors,” Chinese Journal of Aeronautics, vol. 36, no. 1, pp. 311-323, 2023, doi: https://doi.org/10.1016/j.cja.2022.01.001
Standard SAE, Potential Failure Mode and Effects Analysis in Design (Design FMEA) and Potential Failure Mode and Effects Analysis in Manufacturing and Assembly Processes (Process FMEA) and Effects Analysis for Machinery (Machinery FMEA), Warrendale, PA: SAE; 2002, Available: https://www.sae.org/standards/content/j1739_202101/
Marquez, D. Terhaer, K. Scheinemann, P. Mirnajafizadeh, A. Carty, C.P. Stewart, and A. Rodney, “Quality by Design for industry translation: Three-dimensional risk assessment failure mode, effects, and criticality analysis for additively manufactured patient-specific implants, Engineering Reports, vol. 2, no. 1, 2020, doi: https://doi.org/10.1002/eng2.12113
Livani,M , Ketabi,M and Davarzani,M . (2023). Reliability Evaluation of Systems Related to PC-7 Aircrew Using FMEA Method. International Journal of Reliability, Risk and Safety: Theory and Application, 6(2), 65-75. doi: 10.22034/ijrrs.2023.6.2.8
MLA
Livani,M , , Ketabi,M , and Davarzani,M . "Reliability Evaluation of Systems Related to PC-7 Aircrew Using FMEA Method", International Journal of Reliability, Risk and Safety: Theory and Application, 6, 2, 2023, 65-75. doi: 10.22034/ijrrs.2023.6.2.8
HARVARD
Livani M, Ketabi M, Davarzani M. (2023). 'Reliability Evaluation of Systems Related to PC-7 Aircrew Using FMEA Method', International Journal of Reliability, Risk and Safety: Theory and Application, 6(2), pp. 65-75. doi: 10.22034/ijrrs.2023.6.2.8
CHICAGO
M Livani, M Ketabi and M Davarzani, "Reliability Evaluation of Systems Related to PC-7 Aircrew Using FMEA Method," International Journal of Reliability, Risk and Safety: Theory and Application, 6 2 (2023): 65-75, doi: 10.22034/ijrrs.2023.6.2.8
VANCOUVER
Livani M, Ketabi M, Davarzani M. Reliability Evaluation of Systems Related to PC-7 Aircrew Using FMEA Method. IJRRS. 2023;6(2):65-75. doi: 10.22034/ijrrs.2023.6.2.8